Đăng nhập

Từ khóa
Danh mục

Máy khò từ SMD REWORK STATION FEICK- 858D
Máy khò từ SMD REWORK STATION FEICK- 858D - anh 1

Click vào ảnh lớn để zoom

Giá : 973.420.469 VND
Bảo hành : 6 tháng
Lượt xem: 60

Technical Parameters

Model  
voltage AC220V/50Hz
Power consumption 700W
Type of air pump Gentle wind of brushless fan
Gas flow 120L/min(MAX)
Temperature range 100-450℃
Length of handle(including the wire) 1.2CM
Size 151(L)*100(W)*153(H)mm
Weight About 1.5KG
noise <40dB
Display LED(DIGITAL)(RESOLUTION,1)
 
Warning
1.Before using the hot air rework station, you must abide by the following measures in order not to get an electric shock, result in damages to people or result in fire, etc.
2.In order to secure the safety of people, you must use the parts or accessories that the factory of origin certificates or recommends; or it will lead to serious aftermaths.
3.This rework station must be repaired by qulified technicians or the appointed person by us.
4.Be careful, for it is operated at a high temperature. Don't use it near flammable and explosivegas and objects, for the tip and the air from it are steaming-hot, which can burn people. Don't touch the heating element or spray the hot air against people.
5.When the hot air rework station starts to work, don't leave from your post.
6.Keep away from children.
7.When it starts to work, don't install the nozzle until the heating pipe and nozzle are cooled.
8.Please keep the draughts of input and output expedite; there should be no block.
9.After using it, remember to cool the machine. You should put the handle on the shelf. When the machine is in the waiting state, you can make the power off.
10.If you don't use it for a long time, you should put the connector plug off.
 
Replaceable Parts
NO. Name of parts Instruction
1 Components of the handle 220V  
Components of the handle 110V  
2 Handle shell  
3 858 PCB(component) LED-based Instruction
4 AT858D+ PCB(component) LED Microcomputer Digital Display
5 pump  
6 858 heating core 220V  
7 858 heating core 110V   
8 Handle shelf  
9 858 nozzle One set
 
Usage
1.Soldering and de-soldering the most of the SMD component, such as SOIC, CHIP, QFP, PLCC, BAG and so on.
2.De-solder different shielding boxes or shielding covers conveniently. Make heat shrinkage for the heat-shrink tube and the PVC tube.
3.Warm-up the mini-type metal and the mechanism, relax firm components.
4.It can be used for the lapped soldering for the PVC paint and the composition cloth, and the soldering of the bitumen for the roof. And use the high temperature to do disinfection works for animal cages
5.Make the PVC, PS, high temperature plastic and the wood formed.
6.Make the thaw for the ice, conduit pipe and mechanism.
7.Make the paint, the strainer and the glue water heating dry.
8.For all the heating without fire.
 
 
Temperature Setting
Hot Air Rework Station of LED-based Instruction Rotate temperature control knob to the desired location of the temperature scale line.Hot Air Rework Station of LED Microcomputer Digital Display:
1.When connecting the power, press the connected keys; then the setted temperature will appear on the temperature display window.
2.Press the key that is upward; then the setted temperature will rise by 1, which will appear on the display window. Press the key that is downward; then the setted temperature will fall by If the two keys are pressed successively, the temperature will rise or fall rapidly. If you release the pressed keys, the setted temperature will appear for two seconds on the display window and then the actual temperature will appear.
 
Note: Symbol Description
1.Display “SLP ”, means the outlet temperature is lower than 100 and the rework station enters  the waiting mode. The handle should be put on the handle shelf.
2.Display “S-E ”, means there is something wrong with the sensor of the rework station. The heating elements should be changed.(heating elements and components of the sensor)
3.When operating, the display temperature “H-E ”, means that the temperature will not rise and the heating elements of the rework station may be damaged; the heating elements should be changed.(heating elements and components of the sensor)
 
Operation Instructions
1.There may be very high temperature in the outlet or near it. Be careful in order not to get hurt.
2.The heating handle must be put on the handle shelf. Don't put it on the table or other places.
3.Keep the blowing way unblocked.
4.After using, make sure the unit cool down, put it in a safe place. After turn the power off, the unit will automatically blow cool air for a short time. Don't disconnect the plug during this cooling process, it will power off automatically about one minute later.
5.When operating, the distance between the outlet and the object should be at least 2mm on the basis of the outlet.
6.According to the requirements of work, choose the suitablenozzle, for different nozzles are a little different in temperature.
 
Replacement Of The Heating Element
1.Replace the heating element after they are cool.
2.Remove screws of the handle.
3.Remove the fan, and disconnect the connecting wire of the heating element, pay attention to the position for the connecting wire.
4.Take out the heating element and the mica paper from the steel tube, and do not break the mica paper.
5.Use the mica paper to pack up the heating element, insert it in the steel tube, and the installation of the heating element should be on the designated position, and do not let it touch the ground wire.
6.Connect the connecting wire of the heating element according to the original position.
7.Install the handle and screw down the screws.

Phản hồi

Người gửi / điện thoại

Nội dung

 
 

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

G-LINK TELECOM CO., LTD : Chuyên ban buôn - bán lẻ - cung cấp các thiết bị Viễn thông - An ninh

VPGD: Ngõ 178  - Nguyễn Lương Bằng - Đống Đa - Hà Nội

Mobile: 0973.420.469

Website bán hàng trực tuyến của G-LINK TELECOM

http://thietbibuudienvn.mov.mn/

E-mail: shopglink68@gmail.com *    Thời gian làm việc: từ 9h đến 18h ( từ thứ 2 - thứ 7)

Nhãn hiệu G-LINK được bảo hộ độc quyền bởi cục Sở hữu trí tuệ theo văn bằng số 82745/QĐ-SHTT. số đơn 4-2008-14951 thuộc bản quyền G-LINK TELECOM

Camera quan sát | Camera vantech | Camera quan sát Vantech | Vantech Camera | Đầu ghi Vantech | Đầu ghi hình vantech | Phân phối đầu ghi Vantech | Phân phối Camera Vantech | Phân phối Camera quan sát Vantech | Camera avtech | avtech camera | camera quan sát avtech | camera chống trộm | camera hồng ngoại | camera giám sát avtech |đầu ghi avtech | đầu ghi hình avtech | phân phối camera avtech | phân phối đầu ghi avtech | báo trộm không dây | báo trộm hồng ngoại | báo trộm qua điện thoại | báo trộm thông minh |thiết bị báo động chống trộm| báo trộm karassn | hồng ngoại báo trộm | hồng ngoại không dây | công tắc từ | cửa từ | Tổng đài điện thoại | tổng đài nội bộ | lắp đặt tổng đài | lắp đặt tổng đài điện thoại | tổng đài Panasonic | tổng đài adsun | tổng đài ike | phân phối tổng đài ike | chuông cửa màn hình | chuông cửa hình ảnh | chuông cửa commax | chuông cửa samsung | chuông cửa kocom | chuông cửa huyndai | công tắc từ trộm|báo trộm siemens | báo trộm networx | camera questek | camera nichietsu |camera picotech | camera poe | camera escort | camera quan sát escort | camera quan sát picotech | camera quan sát nichietsu | camera quan sát questek | camera quan sát poe| camera samsung | camera quan sát samsung | camera sony | camera quan sát sony | camera sanyo | camera quan sát sanyo | camera LG | camera quan sát LG | Camera MC |camera quan sát MC | camera sanvitek | camera quan sát Sanvitek | camera secam | camera hitaichi | camera quan sát giá rẻ | camera quan sát khuyến mại | khuyến mại camera quan sát | khuyến mại báo trộm | camera giá shock | máy chiếu bóng đá | máy chiếu van phòng | may chieu truong hoc | bo dam cam tay | bo dam kenwood | bo dam motorola | bo dam icom | bo dam gia re | cảnh báo rò rỉ khí gas | camera ip | máy kích điện | may kich dien | kich dien | sạc ắc quy | sac ac quy | nap ac quy | điện thoại panasonic | panasonic kx ts500 | vo go dien thoai | dien thoai mobiado | vo mobiado | sửa máy bộ đàm | cho thuê bộ đàm | thuê bộ đàm | may kho han | máy hàn | máy khò quick

Tự tạo website với Webmienphi.vn